One of the most important things you can do as a responsible vehicle owner is to protect your vehicle against everything that Mother Nature throws at it.
Regularly washing, waxing, and cleaning your vehicle is going to go a long way towards protecting its condition – but you’re going to want to do everything in your power to protect against rust at all costs.
When left unchecked even the smallest amount of rust can quickly become something that overwhelms your vehicle, destroys its value, and (quite literally) eats it into tiny little pieces right before your very eyes.
This is why you’ll want to do everything you can to prevent against rust – taking advantage of all the rust protection and prevention treatment options provided by Rustbuster Ltd. With the right approach (and the right products) you’re going to be able to effortlessly protect your vehicle from one of the most destructive forces of nature, the oxidation of your vehicle as it turns into a legitimate rust bucket.
Let’s dive right into everything you need to do to better prepare your vehicle before applying rust prevention treatments!
It all starts with a deep clean using SURFACE preparation products
It will be absolutely impossible to fully protect your vehicle against rust appropriately without first making sure that every surface of your vehicle to be protected against rust has been cleaned as best it can be.
By utilising Rustbuster Ltd products, like the line of SURFACE preparation products, you’re going to be able to effortlessly clean every surface of your vehicle (including the undercarriage) and block rust effectively from seizing hold in the first place.
Cover areas you don’t want treated
After you have deeply cleaned your entire vehicle you’ll want to then start covering up the areas that you don’t want to be treated with undercarriage and rust protection products like the FE-123 Rust Converter or the SALT removing products.
Not only will you want to cover up (usually with masking tape and newspaper) all of the different critical components of your undercarriage and access points to your engine bay, but you’ll also want to make sure that you protect any of the paint that may come in contact with your undercoating materials as well.
Now that you have completely cleaned your vehicle from top to bottom you’ll want to treat any of the small spots of rust that have already appeared using products like the Rust Converter products.
Don’t be shy about using a wire brush to scrub as much of the surface rust off your vehicle as possible, as you’ll be able to apply a layer of coating material later down the line that protects these areas.
Utilise rust proofing materials such as EPOXY MASTIC rust proofing paint
The final step in this process is to actually rust proof your vehicle using only the highest quality materials available. Many of the respiratory materials available for sale from Rustbuster Ltd are going to come in aerosol format, and they will allow you to evenly spray an effective coating of rust proofing on every surface you need to cover.